Proxmark3 community

l07tb0y

Contributor

Registered: 2019-08-12

Posts: 9

Cant get the bluetooth module to work

So I think I read the forums and the manual and it says the following should get the bluetooth module working but I can't get it to run

brew install --with-blueshark proxmark3
Error: rfidresearchgroup/proxmark3/proxmark3 is a head-only formula
Install with `brew install --HEAD rfidresearchgroup/proxmark3/proxmark3`

[=] Using UART port /dev/tty.usbmodemiceman1           
[=] Communicating with PM3 over USB-CDC           

 [ Proxmark3 RFID instrument ] 
          

 [ CLIENT ]          
  client: RRG/Iceman          
  compiled with Clang/LLVM 4.2.1 Compatible Apple LLVM 10.0.1 (clang-1001.0.46.4)          

 [ PROXMARK RDV4 ]          
  external flash:                  present           
  smartcard reader:                present           

 [ PROXMARK RDV4 Extras ]          
  FPC USART for BT add-on support: absent           
          
 [ ARM ]
  bootrom: RRG/Iceman/master/47b60d8 2019-08-11 21:49:19
       os: RRG/Iceman/master/47b60d8 2019-08-11 21:49:32
  compiled with GCC 5.4.1 20160919 (release) [ARM/embedded-5-branch revision 240496]

 [ FPGA ]
  LF image built for 2s30vq100 on 2019/ 7/31 at 15:57:16
  HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23          

 [ Hardware ]           
  --= uC: AT91SAM7S512 Rev B          
  --= Embedded Processor: ARM7TDMI          
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 271172 bytes (52%) Free: 253116 bytes (48%)          
  --= Second Nonvolatile Program Memory Size: None          
  --= Internal SRAM Size: 64K bytes          
  --= Architecture Identifier: AT91SAM7Sxx Series          
  --= Nonvolatile Program Memory Type: Embedded Flash Memory          

          
[usb] pm3 --> 

tried the following as well

brew install --with-blueshark --HEAD rfidresearchgroup/proxmark3/proxmark3
Warning: rfidresearchgroup/proxmark3/proxmark3 HEAD-47b60d8 is already installed and up-to-date
To reinstall HEAD, run `brew reinstall proxmark3`

bettse

Contributor

From: Portland, OR, USA

Registered: 2015-02-16

Posts: 32

Re: Cant get the bluetooth module to work

When you run `brew install ...` do you see

==> make all PLATFORM_EXTRAS=BTADDON

(specifically the PLATFORM_EXTRAS bit)?

I _had_ it working (at least showing 'present' instead of 'absent'), but when I tried to update the client (and flash the firmware to match) I ended up with my own problems.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Cant get the bluetooth module to work

issues on GH regarding this.
https://github.com/RfidResearchGroup/pr … issues/326

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Cant get the bluetooth module to work

Fix pushed to repo.  Pull latest and you all should be good to go again!