Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2013-10-07 15:13:43
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Radiowar's modified PM3
Has anyone tried the Radiowars modified PM3? If so, is it good? better then the original PM3?
http://radiowar.org/hardware/proxmark3.html#more-16
Offline
#2 2014-03-27 20:08:19
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Radiowar's modified PM3
Well, I finally got around and ordered one. Lets see if it is better then the old one I got.
Offline
#3 2015-02-27 07:01:36
- tinytony
- Member
- Registered: 2015-02-27
- Posts: 3
Re: Radiowar's modified PM3
Hi iceman, is it better than the original pm3 ? I'm gonna to get one. 
Offline
#4 2015-02-27 11:13:44
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Radiowar's modified PM3
Dont know if its better. But you need to take notice of the antennas ( The capacitors, c35?!? if its 47 or 100)
I have two, one of each kind, both works.
Offline
#5 2015-02-28 10:05:28
- tinytony
- Member
- Registered: 2015-02-27
- Posts: 3
Re: Radiowar's modified PM3
Got it Thanks iceman !
Offline
#6 2015-04-22 12:14:48
- tinytony
- Member
- Registered: 2015-02-27
- Posts: 3
Re: Radiowar's modified PM3
Hi iceman, it's me again. 
Have you tried the DIY HF antenna on the RadioWar modified pm3 ?
And which antenna version do you used with the RadioWar pm3, http://proxmark3.com/products/HFAPCB/ or http://item.taobao.com/item.htm?spm=a1z10.1-c.w5003-9882096718.3.iblYLE&id=42133553656&scene=taobao_shop ?
Offline
#7 2015-04-22 13:01:57
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Radiowar's modified PM3
I suppose the first link is the ryscorps antenna, that should work with the modified pm3.
I just used the one from xfpga.com, standard green one. I get 6-7v out of it, not the best and it has problems since awhile back.
Usually it works.
Offline
Pages: 1