Proxmark3 community

HighPressure

Contributor

Registered: 2016-07-17

Posts: 56

hello from austria

Hi!

I am new to nfc & rfid
started first with an acr122u and after I liked what I saw I recently got the proxmark3 easy devkit 3 from aliexpress
works great, and after some reading here in the forum found the small problems I had with flashing the iceman fork.

hope to find some good informations and provide some stuff too

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: hello from austria

Welcome to the forums!

And try the latest changes in my fork, just pushed them

HighPressure

Contributor

Registered: 2016-07-17

Posts: 56

Re: hello from austria

ahhh
thanks for the work and all the support to the community

gonna update for sure, as I see some gcc errors on quit, exit and ctrl-c which I found only in older posts.
also some stability issues, that got better when I swapped to your fork (working with different cards during runtime, triggers them)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: hello from austria

Ref: http://www.proxmark.org/forum/viewtopic.php?id=3036
Ref: https://hub.docker.com/r/iceman1001/proxmark3/

Yeah,  the flashing from inside a docker container has some issues but at least now its working.   The ctrl-c and mknod commands has been mentioned on both the above links.  Also watch the youtube video.

One thing still is the "data plot"  doesn't work in that docker container still.

Even if I call my fork experimental,  its more stable than PM3 master. Thanks to all coverity scan testings.