Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-05-25 09:46:07
- stock99
- Contributor
- Registered: 2017-05-25
- Posts: 1
greeting...
Hi Everyone,
Very new in rfid and proxmarks. I have a little experience with command line in kali. I am kinda struggle on the setup for my proxmark3 dev kits (ver2) brought from elechouse... I will make a new post in detail (if allow...)
Offline
#2 2017-05-25 23:12:12
- ntk
- Contributor
- Registered: 2015-05-24
- Posts: 701
Re: greeting...
I don't understand why so many new users having issue with PM3, even in kali... Could you all pls halt before doing any flashing. tell us first what you do / what you see when you first time plug PM3 to your computer.
be patient && stop before doing any flashing to the board. With an elechouse PM3, with any PM3 sold nowadays you should not run into problem at all. they all should be already in CDC communication mode
So any step involved upgrading bootrom to change PM3 from a HID communication device to a CDC USB communication device should be dis-regarded.
Last edited by ntk (2017-05-25 23:34:36)
Offline
#3 2017-05-28 16:23:20
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: greeting...
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125
And you can now post in the other categories.
Offline
Pages: 1
Topic closed