Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-10-10 15:21:48
- yongmuh
- Contributor
- Registered: 2017-10-10
- Posts: 8
I am new to this forum
Hi all, the reason I come here is to consult the experts regarding a problem with pm3 reading.
I have one indala tag that my pm3 could not identify it properly. First PC was not able to read it completely. I tried it on another PC and it only can be identified intermittently. The result was inconsistent (the UID varies). My current firmware is 2.0.0 but same problem persists despite upgrading to 3.0.1. I have a good LF antenna voltage (30-40V).
Your help is greatly appreciated. Thank you.
Offline
#2 2017-10-10 16:46:37
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: I am new to this forum
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
You can now post in correct categories.
Offline
Pages: 1
Topic closed