Proxmark3 community

jellies

Member

Registered: 2016-04-18

Posts: 2

Proxmark3 Easy from Taobao thoughts?

I'm thinking of purchasing the Proxmark3 Easy from Taobao (https://world.taobao.com/item/530178074292.htm?spm=a312a.7700714.0.0.njq65w#detail) and was wondering what the limitation of this was compared to normal Proxmark3s?

I need to clone my apartment key (DKS/Idteck) which appears to be 125khz with PSK/or modified PSK modulation and was wondering if this item would do the trick.

doegox

Contributor

Registered: 2009-03-19

Posts: 11

Re: Proxmark3 Easy from Taobao thoughts?

Hi.
I received mine today.
I've already a few "old" proxmark3 and in comparison I must admit this one rocks!

• very compact design, including LF & HF antennas

• antennas tuning is very good, see below

• the pcb can be held without being afraid to shortcut or disturb RF parts

My device:

# LF antenna: 32.04 V @   125.00 kHz          
# LF antenna: 27.50 V @   134.00 kHz          
# LF optimal: 35.75 V @   127.66 kHz          
# HF antenna: 28.22 V @    13.56 MHz          

Some quick tests of the maximal distance between antenna and tag, with LF antenna mounted on the PCB:

• LF HID read: 1cm

• LF EM4100 read: 3cm

• LF Hitag2 read: 3.5cm

• HF MFC read: 7cm!!!

Without the LF antenna:

• HF MFC read: 8cm!!!

It's fully compatible with official firmwares, comes with 2.0.0 and works nice with 2.2.0 and with today git HEAD as well.

BTW it came from http://www.aliexpress.com/item/2016-lat … 17468.html

UPDATE:

There is one limitation, thanks moebius for having spotted it.
It's an AT91SAM7S256, not AT91SAM7S512 so twice less memory (note in the capture below I already flashed the fw):

./proxmark3 /dev/ttyACM0
Prox/RFID mark3 RFID instrument          
bootrom: official/v2.2.0-190-gd889dac-suspect 2016-05-25 17:02:57
os: official/v2.2.0-190-gd889dac-suspect 2016-05-25 17:02:58
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
          
uC: AT91SAM7S256 Rev D          
Embedded Processor: ARM7TDMI          
Nonvolatile Program Memory Size: 256K bytes. Used: 169050 bytes (64%). Free: 93094 bytes (36%).          
Second Nonvolatile Program Memory Size: None          
Internal SRAM Size: 64K bytes          
Architecture Identifier: AT91SAM7Sxx Series          
Nonvolatile Program Memory Type: Embedded Flash Memory       

Last edited by doegox (2016-05-26 00:24:27)

phiber

Contributor

Registered: 2016-10-11

Posts: 37

Re: Proxmark3 Easy from Taobao thoughts?

I just got one 2 days ago.. still learning it but this is my dump.

Prox/RFID mark3 RFID instrument          
bootrom: master/v2.3 2016-09-19 20:28:38
os: master/v2.3 2016-09-19 20:28:38
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
uC: AT91SAM7S256 Rev B          
Embedded Processor: ARM7TDMI          
Nonvolatile Program Memory Size: 256K bytes. Used: 183707 bytes (70%). Free: 78437 bytes (30%).          
Second Nonvolatile Program Memory Size: None          
Internal SRAM Size: 64K bytes          
Architecture Identifier: AT91SAM7Sxx Series          
Nonvolatile Program Memory Type: Embedded Flash Memory 

i flashed it to the latest as well..

jaudo

Contributor

Registered: 2017-07-22

Posts: 7

Re: Proxmark3 Easy from Taobao thoughts?

I just got one 2 days ago.. still learning it but this is my dump.

Prox/RFID mark3 RFID instrument          
bootrom: master/v2.3 2016-09-19 20:28:38
os: master/v2.3 2016-09-19 20:28:38
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
uC: AT91SAM7S256 Rev B          
Embedded Processor: ARM7TDMI          
Nonvolatile Program Memory Size: 256K bytes. Used: 183707 bytes (70%). Free: 78437 bytes (30%).          
Second Nonvolatile Program Memory Size: None          
Internal SRAM Size: 64K bytes          
Architecture Identifier: AT91SAM7Sxx Series          
Nonvolatile Program Memory Type: Embedded Flash Memory 

i flashed it to the latest as well..

How did you flash it? I tried to upload it to 2.4 firmware version and now Im having problems recognising the device.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Proxmark3 Easy from Taobao thoughts?

please, don't double post your question on forum.