Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2018-12-12 20:43:56
- Wyjec
- Contributor
- Registered: 2018-06-02
- Posts: 10
hf se against iclass
Hi, I have some weird issue. Couple of days ago I flashed my proxmark with Iceman's fork. Everything was fine until I wanted to use "hf se" on my iclass card. This command works like on 1/50 attempts. This very same card was recognized 100% of the time before flashing the firmware. I can't belive that this behaviour is caused by flashing FW, because I returned to previous one and there is the same problem.
It happens only for:
Mem: 16 KBits/16 App Areas (255 * 8 bytes) [1F]
Always works for:
Mem: 2 KBits/2 App Areas (31 * 8 bytes) [1F]
Any idea?
Last edited by Wyjec (2018-12-12 21:08:30)
Offline
#2 2019-01-02 20:49:48
- Wyjec
- Contributor
- Registered: 2018-06-02
- Posts: 10
Re: hf se against iclass
Ok, I noticed, that my company started to change our access control system cards. They're look the same as the old one, but Proxmark can't recognize them. Are there any new iclass cards, that aren't even recognizable by Proxmark?
Offline
#3 2019-01-03 17:23:00
- Heru
- Contributor
- Registered: 2017-10-08
- Posts: 78
Re: hf se against iclass
may be the + cards,
Offline
#4 2019-01-04 00:22:15
- Wyjec
- Contributor
- Registered: 2018-06-02
- Posts: 10
Re: hf se against iclass
Can you explain what do you mean by saying this?
Offline
#5 2019-06-14 03:00:59
- aaronml
- Contributor
- Registered: 2018-01-02
- Posts: 30
Re: hf se against iclass
Ok, I noticed, that my company started to change our access control system cards. They're look the same as the old one, but Proxmark can't recognize them. Are there any new iclass cards, that aren't even recognizable by Proxmark?
Maybe Seos? Not sure if that has been added yet...
Offline
#6 2019-06-14 17:23:50
- Donni
- Contributor
- Registered: 2019-04-29
- Posts: 15
Re: hf se against iclass
What are the markings? iClass, iClass SE? Also what symbol does the serial number start with *, +, = ?
Offline
#7 2019-06-26 19:11:56
- Wyjec
- Contributor
- Registered: 2018-06-02
- Posts: 10
Re: hf se against iclass
I can't see the markings, since this side of a card is covered by some labels. But I'm guessing that the serial number start with +
Btw. what make those types card so diffucult to even read the CSN?
Offline
Pages: 1