Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-11-03 21:57:29
- mnemarchon
- Contributor
- Registered: 2019-08-30
- Posts: 18
[Solved] Best way to solder or otherwise add JTAG connector to RDV4?
Proxmark 3 RDV 4 has a very compact build, but I need to flash bootloader. Since I bricked the first edition of Proxmark by flashing bootloader twice and had to unbrick it with JTAG, I would very much like to have a JTAG connection before flashing new bootloader to RDV4.
Unfortunately, the space there is very limited, the connector pitch is very small, so pogo pins won't fit as a temporary connector.
Anyone has a good idea how to put/solder a JTAG connector to RDV4 without breaking the ability to close the case (so that connector doesn't stick out or block closing the case)?
Last edited by mnemarchon (2019-11-05 22:11:51)
Offline
#2 2019-11-03 23:55:22
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
You could try something like this
https://github.com/RfidResearchGroup/pr … wiki/Tools
Offline
#3 2019-11-05 19:16:54
- mnemarchon
- Contributor
- Registered: 2019-08-30
- Posts: 18
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
Thanks, that looks great. Might even work one other device that seems to have the same JTAG connector pitch.
Offline
#4 2019-12-11 14:42:47
- flux
- Contributor
- Registered: 2019-02-09
- Posts: 4
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
Is there a pinout drawing for the flashing-tool so we can use it with the buspirate without figuring out which pins to connect to it first?
Offline
#5 2019-12-11 15:20:47
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
You mean like
https://github.com/RfidResearchGroup/pr … g_notes.md
Offline
#6 2019-12-11 16:06:39
- flux
- Contributor
- Registered: 2019-02-09
- Posts: 4
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
You mean like
https://github.com/RfidResearchGroup/pr … g_notes.md
Nope, what I was asking for is the pinout of the flashing-tool/jtag-adapter ( https://github.com/RfidResearchGroup/pr … wiki/Tools ) so one can attach the bus pirate to the pins of the Jlink-connector-port. I guess that should be possible right?
Offline
#7 2019-12-11 16:35:28
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
you mean you can't read the pinout from that picture?
Offline
#8 2019-12-18 19:43:05
- fazer
- Contributor
- Registered: 2019-03-02
- Posts: 156
Re: [Solved] Best way to solder or otherwise add JTAG connector to RDV4?
Good evening, there are tools designed for the jtag of rdv4. Indeed there are other procedures but there you have to adapt the tools for. Given the troubles that can cause a bad connection, there is not much room for eventually solder pins. I opted for the material. Now with a little patience & a good welding machine why not.
Good night.
Last edited by fazer (2019-12-18 19:45:07)
Offline