Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-11-26 13:14:24
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
iclass printed serial number and CSN
Hi dear Gurus,
any one know how the links or alogorithm between icalss card number printed on card corner and the card CSN read by pm3?
I mean if we have the printed iclass card number , how can we calculate the card CSN if not read by PM3.....^)^
BR
Offline
#2 2019-11-26 14:28:21
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: iclass printed serial number and CSN
That would be the wiegand printed on your card, not the CSN.
Offline
#3 2019-11-27 14:32:46
- yukihama
- Contributor
- Registered: 2018-05-13
- Posts: 133
Re: iclass printed serial number and CSN
That would be the wiegand printed on your card, not the CSN.
Dear iceman,
do you mean the printed icalss card number is the actual wiegand that the iclass reader will decrypted and sent to control board?
If this is true, then it will be very interesting to have fun with SE and ER iclass.
BR
Last edited by yukihama (2019-11-27 14:37:48)
Offline
#4 2019-11-27 18:12:02
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: iclass printed serial number and CSN
Depends but if its a preprogrammed card, the printed number could be the wiegand data. HID offers lots of options when it comes products. There is no general rule for it.
Offline
Pages: 1