Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2021-02-18 06:46:00
- Aleksandr
- Contributor
- Registered: 2021-02-17
- Posts: 3
Change the AES password for the Mifare Plus
Friends, explain how you can change the AES password for the Mifare Plus sector, which is already in the SL3 mode? Writing to special blocks 40xx through "hf mfp wrbl <0..255>" is not available, since the number is limited to 255.The command "hf mfp wrp" is intended only for a card in a transport configuration SL0.
Last edited by Aleksandr (2021-02-18 06:46:36)
Offline
#2 2021-02-18 11:51:06
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Change the AES password for the Mifare Plus
yes, the "hf mfp" commands needs some love.
Offline
#3 2021-02-18 13:27:16
- Aleksandr
- Contributor
- Registered: 2021-02-17
- Posts: 3
Re: Change the AES password for the Mifare Plus
Probably this can be done through scripts. But unfortunately I don't understand them. Is there documentation for the scripting language?
Offline
#4 2021-02-19 08:49:09
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Change the AES password for the Mifare Plus
No, you will need to look at existing scripts to learn how it works
Offline
#5 2021-12-22 01:31:25
- kosgguy
- Contributor
- Registered: 2021-12-18
- Posts: 56
Re: Change the AES password for the Mifare Plus
damn
Offline