"Communicating with Proxmark3 device failed" on hf search

www · 2021-04-13 10:30:36

Hi, I reflashed my PM3 RDV4 ( with BT add-on ) today with the last git pull from https://github.com/RfidResearchGroup/proxmark3
[ice coffee.4.9237][2020-05-21]
Everything went smooth, the client is connecting to the device flawlessly, hw status looks OK to me, but it seems to timeout with a simple "hf search". ( "Communicating with Proxmark3 device failed" )
I stays stucked there with the "D" red led up.
I'm on windows / WSL2.

Can anyone kindly point me to a possible fix or hint on what's happening here??
Thank you very much.

[=] Session log /home/yolo/.proxmark3/logs/log_20210413.txt
[+] loaded from JSON file /home/yolo/.proxmark3/preferences.json
[=] Using UART port /dev/ttyS10
[=] Communicating with PM3 over USB-CDC


  ██████╗ ███╗   ███╗█████╗ 
  ██╔══██╗████╗ ████║╚═══██╗
  ██████╔╝██╔████╔██║ ████╔╝
  ██╔═══╝ ██║╚██╔╝██║ ╚══██╗
  ██║     ██║ ╚═╝ ██║█████╔╝       Iceman ☕
  ╚═╝     ╚═╝     ╚═╝╚════╝    ❄️ bleeding edge

  https://github.com/rfidresearchgroup/proxmark3/


 [ Proxmark3 RFID instrument ]

 [ CLIENT ]
  client: RRG/Iceman/master/v4.9237-3542-g536ddd17f 2021-04-13 10:28:39
  compiled with GCC 9.3.0 OS:Linux ARCH:x86_64

 [ PROXMARK3 ]
  device.................... RDV4
  firmware.................. RDV4
  external flash............ present
  smartcard reader.......... present
  FPC USART for BT add-on... present

 [ ARM ]
  bootrom: RRG/Iceman/master/v4.9237-3542-g536ddd17f 2021-04-13 10:29:25
       os: RRG/Iceman/master/v4.9237-3542-g536ddd17f 2021-04-13 10:29:44
  compiled with GCC 9.2.1 20191025 (release) [ARM/arm-9-branch revision 277599]

 [ FPGA ]
  LF image built for 2s30vq100 on 2020-07-08 at 23: 8: 7
  HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
  HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23: 8:30

 [ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Internal SRAM size: 64K bytes
  --= Architecture identifier: AT91SAM7Sxx Series
  --= Embedded flash memory 512K bytes ( 62% used )
[usb] pm3 --> hw version

 [ Proxmark3 RFID instrument ]

 [ CLIENT ]
  client: RRG/Iceman/master/v4.9237-3542-g536ddd17f 2021-04-13 10:28:39
  compiled with GCC 9.3.0 OS:Linux ARCH:x86_64

 [ PROXMARK3 ]
  device.................... RDV4
  firmware.................. RDV4
  external flash............ present
  smartcard reader.......... present
  FPC USART for BT add-on... present

 [ ARM ]
  bootrom: RRG/Iceman/master/v4.9237-3542-g536ddd17f 2021-04-13 10:29:25
       os: RRG/Iceman/master/v4.9237-3542-g536ddd17f 2021-04-13 10:29:44
  compiled with GCC 9.2.1 20191025 (release) [ARM/arm-9-branch revision 277599]

 [ FPGA ]
  LF image built for 2s30vq100 on 2020-07-08 at 23: 8: 7
  HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
  HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23: 8:30

 [ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Internal SRAM size: 64K bytes
  --= Architecture identifier: AT91SAM7Sxx Series
  --= Embedded flash memory 512K bytes ( 62% used )
[usb] pm3 --> script run init_rdv4
[+] executing lua /usr/local/bin/../share/proxmark3/luascripts/init_rdv4.lua
[+] args ''
----------------------------------------
----------------------------------------

Prepping your Proxmark3 RDV4
Uploading dictionaries to RDV4 flashmemory
----------------------------------------
[=] treating file as MIFARE Classic keys
[+] loaded 1094 keys from dictionary file /usr/local/bin/../share/proxmark3/dictionaries/mfc_default_keys.dic
[+] Wrote 6566 bytes to offset 233472
[=] treating file as T55xx passwords
[+] loaded 113 keys from dictionary file /usr/local/bin/../share/proxmark3/dictionaries/t55xx_default_pwds.dic
[+] Wrote 454 bytes to offset 245760
[=] treating file as iCLASS keys
[+] loaded  9 keys from dictionary file /usr/local/bin/../share/proxmark3/dictionaries/iclass_default_keys.dic
[+] Wrote 74 bytes to offset 241664
----------------------------------------
Configure T55XX device side to match RDV4
----------------------------------------
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A |
[#]     long leading reference |  31 |  20 |  18 |  50 |  15 | N/A | N/A |
[#]               leading zero |  31 |  20 |  18 |  40 |  15 | N/A | N/A |
[#]    1 of 4 coding reference |  29 |  17 |  15 |  31 |  15 |  47 |  63 |
[#]
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A |
[#]     long leading reference |  29 |  17 |  18 |  50 |  15 | N/A | N/A |
[#]               leading zero |  31 |  20 |  18 |  40 |  15 | N/A | N/A |
[#]    1 of 4 coding reference |  29 |  17 |  15 |  31 |  15 |  47 |  63 |
[#]
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A |
[#]     long leading reference |  29 |  17 |  18 |  50 |  15 | N/A | N/A |
[#]               leading zero |  29 |  17 |  18 |  40 |  15 | N/A | N/A |
[#]    1 of 4 coding reference |  29 |  17 |  15 |  31 |  15 |  47 |  63 |
[#]
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A |
[#]     long leading reference |  29 |  17 |  18 |  50 |  15 | N/A | N/A |
[#]               leading zero |  29 |  17 |  18 |  40 |  15 | N/A | N/A |
[#]    1 of 4 coding reference |  29 |  17 |  15 |  31 |  15 |  47 |  63 |
[#]


[#] Memory
[#]   BigBuf_size.............39040
[#]   Available memory........39040
[#] Tracing
[#]   tracing ................1
[#]   traceLen ...............0
[#]   dma8 memory.............-2115128
[#]   dma16 memory............-2115128
[#]   toSend memory...........-2115128
[#] Current FPGA image
[#]   mode....................
[#] Flash memory
[#]   Baudrate................24 MHz
[#]   Init....................OK
[#]   Memory size.............2 mbits / 256 kb
[#]   Unique ID...............0xD567A882A765B826
[#] Smart card module (ISO 7816)
[#]   version.................v3.11
[#] LF Sampling config
[#]   [q] divisor.............95 ( 125.00 kHz )
[#]   [b] bits per sample.....8
[#]   [d] decimation..........1
[#]   [a] averaging...........Yes
[#]   [t] trigger threshold...0
[#]   [s] samples to skip.....0
[#] LF Sampling Stack
[#]   Max stack usage.........4152 / 8480 bytes
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A |
[#]     long leading reference |  29 |  17 |  18 |  50 |  15 | N/A | N/A |
[#]               leading zero |  29 |  17 |  18 |  40 |  15 | N/A | N/A |
[#]    1 of 4 coding reference |  29 |  17 |  15 |  31 |  15 |  47 |  63 |
[#]
[#] HF 14a config
[#]   [a] Anticol override....std    : follow standard
[#]   [b] BCC override........std    : follow standard
[#]   [2] CL2 override........std    : follow standard
[#]   [3] CL3 override........std    : follow standard
[#]   [r] RATS override.......std    : follow standard
[#] Transfer Speed
[#]   Sending packets to client...
[#]   Time elapsed............500ms
[#]   Bytes transferred.......277504
[#]   Transfer Speed PM3 -> Client = 555008 bytes/s
[#] Various
[#]   Max stack usage.........4152 / 8480 bytes
[#]   DBGLEVEL................1 ( ERROR )
[#]   ToSendMax...............-1
[#]   ToSend BUFFERSIZE.......2308
[#]   Slow clock..............33264 Hz
[#] Installed StandAlone Mode
[#]   HF Mifare ultra fast sniff/sim/clone - aka VIGIKPWN (Colin Brigato)
[#] Flash memory dictionary loaded
[#]   Mifare..................1094 keys
[#]   T55x7...................113 keys
[#]   iClass..................9 keys
----------------------------------------
all done!

[+] finished init_rdv4

[usb] pm3 --> hw status
[#] Memory
[#]   BigBuf_size.............39040
[#]   Available memory........36732
[#] Tracing
[#]   tracing ................1
[#]   traceLen ...............0
[#]   dma8 memory.............-2115128
[#]   dma16 memory............-2115128
[#]   toSend memory...........36732
[#] Current FPGA image
[#]   mode....................
[#] Flash memory
[#]   Baudrate................24 MHz
[#]   Init....................OK
[#]   Memory size.............2 mbits / 256 kb
[#]   Unique ID...............0xD567A882A765B826
[#] Smart card module (ISO 7816)
[#]   version.................v3.11
[#] LF Sampling config
[#]   [q] divisor.............95 ( 125.00 kHz )
[#]   [b] bits per sample.....8
[#]   [d] decimation..........1
[#]   [a] averaging...........Yes
[#]   [t] trigger threshold...0
[#]   [s] samples to skip.....0
[#] LF Sampling Stack
[#]   Max stack usage.........4152 / 8480 bytes
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A |
[#]     long leading reference |  29 |  17 |  18 |  50 |  15 | N/A | N/A |
[#]               leading zero |  29 |  17 |  18 |  40 |  15 | N/A | N/A |
[#]    1 of 4 coding reference |  29 |  17 |  15 |  31 |  15 |  47 |  63 |
[#] 
[#] HF 14a config
[#]   [a] Anticol override....std    : follow standard
[#]   [b] BCC override........std    : follow standard
[#]   [2] CL2 override........std    : follow standard
[#]   [3] CL3 override........std    : follow standard
[#]   [r] RATS override.......std    : follow standard
[#] Transfer Speed
[#]   Sending packets to client...
[#]   Time elapsed............500ms
[#]   Bytes transferred.......275456
[#]   Transfer Speed PM3 -> Client = 550912 bytes/s
[#] Various
[#]   Max stack usage.........4152 / 8480 bytes
[#]   DBGLEVEL................1 ( ERROR )
[#]   ToSendMax...............-1
[#]   ToSend BUFFERSIZE.......2308
[#]   Slow clock..............33264 Hz
[#] Installed StandAlone Mode
[#]   HF Mifare ultra fast sniff/sim/clone - aka VIGIKPWN (Colin Brigato)
[#] Flash memory dictionary loaded
[#]   Mifare..................1094 keys
[#]   T55x7...................113 keys
[#]   iClass..................9 keys
[usb] pm3 --> hf search
 ?  Searching for ThinFilm tag...[!] ⚠️  timeout while waiting for reply.
 ?  Searching for ISO14443-A tag...
[!] ⚠️  Communicating with Proxmark3 device failed

[usb] pm3 --> lf search
[=] You can cancel this operation by pressing the pm3 button
[!] ⚠️  (lf_read) command execution time out
[-] ⛔ Data in Graphbuffer was too small.

Last edited by www (2021-04-13 10:50:02)

gator96100 · 2021-04-13 22:56:52

See https://github.com/RfidResearchGroup/pr … ssues/1233
Also are you sure you are using WSL2? WSL2 isn't supported.

www · 2021-04-14 10:45:29

gator96100 wrote:

See https://github.com/RfidResearchGroup/pr … ssues/1233
Also are you sure you are using WSL2? WSL2 isn't supported.

mmh, thanks.
If I understood correctly the last reply on this issue, this is a bug and i'll have to get back to an older commit to get my RDV4 to work?
Also, yeah, i'm on WSL1 on this particular VM.

  NAME                   STATE           VERSION
* Ubuntu-20.04           Running         1
  docker-desktop-data    Stopped         2
  docker-desktop         Stopped         2

www · 2021-04-21 08:51:41

mmmh ;/
https://github.com/RfidResearchGroup/pr … -674203517

iceman1001 commented on 14 Aug 2020
Even more bleeding edge than expected.
As of right now, don't compile with BTADDON option on current master.

[usb] pm3 --> hw tune
[=] ---------- Reminder ------------------------
[=] `hw tune` doesn't actively tune your antennas,
[=] it's only informative.
[=] Measuring antenna characteristics, please wait...
 ?  12
[=] ---------- LF Antenna ----------
[+] LF optimal: 1832072.03 V -   0.00 kHz
[+] Approx. Q factor (*): 319594.8 by peak voltage measurement
[+] LF antenna is OK
[=] ---------- HF Antenna ----------
[!] ⚠️  HF antenna is UNUSABLE

(*) Q factor must be measured without tag on the antenna

[-] ⛔ Not showing LF tuning graph since all values is zero.

Last edited by www (2021-04-21 09:00:27)

Proxmark3 community

Announcement

#1 2021-04-13 10:30:36

"Communicating with Proxmark3 device failed" on hf search

#2 2021-04-13 22:56:52

Re: "Communicating with Proxmark3 device failed" on hf search

#3 2021-04-14 10:45:29

Re: "Communicating with Proxmark3 device failed" on hf search

#4 2021-04-21 08:51:41

Re: "Communicating with Proxmark3 device failed" on hf search

Board footer