Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2021-04-02 13:59:46
- zeppi
- Contributor
- Registered: 2021-03-07
- Posts: 36
fw mismatch
Hey there,
i have an RDV4.01 with Blueshark installed. I get the following error:
device.................... device / fw mismatch
firmware.................. RDV4
external flash............ present
smartcard reader.......... present
FPC USART for BT add-on... present
mem info gives:
[=] --- Flash memory Information ---------
[snip]
[=] --- RDV4 RSA signature ---------------
[snip]
[-] ⛔ Signature............ ( fail )
[=] --- RDV4 RSA Public key --------------
[+] RRG/Iceman RSA public key check.... ( ok )
[-] ⛔ Genuine Proxmark3 RDV4 signature detected... ❌
What does it mean?
How may I fix this?
Last edited by zeppi (2021-04-03 13:34:32)
Offline
#2 2021-04-03 17:57:17
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: fw mismatch
join the discord and ask me there
Offline
#3 2021-04-03 23:33:09
- zeppi
- Contributor
- Registered: 2021-03-07
- Posts: 36
Re: fw mismatch
I do not have a discord account. On purpose.
Offline
#4 2021-04-04 06:23:20
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: fw mismatch
You can ignore that message. We use it to detect if someone tried to flash RDV4 compile firmware onto a generic pm3 device.
In your case, it is notifying that the signature is not there anymore which seem to happens ppl who bought from LAB401 the last months.
Offline
#5 2021-04-04 19:04:04
- zeppi
- Contributor
- Registered: 2021-03-07
- Posts: 36
Re: fw mismatch
I did not buy from Lab401 but from Sneak.Technology. Is their stock legit?
Offline
#6 2021-04-04 19:24:13
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: fw mismatch
yes
Offline
#7 2021-04-05 12:25:16
- zeppi
- Contributor
- Registered: 2021-03-07
- Posts: 36
Re: fw mismatch
Thank you iceman for the peace of mind, your time is appreciated.
Offline
#8 2021-04-12 13:20:46
- FatDog
- Contributor
- Registered: 2019-04-01
- Posts: 2
Re: fw mismatch
Whew, I have the same issue and bought from Sneak, glad to hear its legit. Wont connect to chameleon on the droid however, and no longer shows up tp walrus. Ill read on and figure it out tho. Not looking for spoonfeeding,, ...not yet.... lol
Offline
#9 2021-04-15 19:15:25
- zeppi
- Contributor
- Registered: 2021-03-07
- Posts: 36
Re: fw mismatch
Whew, I have the same issue and bought from Sneak, glad to hear its legit. Wont connect to chameleon on the droid however, and no longer shows up tp walrus. Ill read on and figure it out tho. Not looking for spoonfeeding,, ...not yet.... lol
WHat do you mean by : wont donnect to chameleon on droid? Why would the pm3 connect to the chameleon app on android anyway?
I actually have the problem that the chameleon Mini device does not connect to the android app via BT.
and both, pm3 and chameleon mini wont show up in Walrus either.
I suspect my chameleon BT is broken or the firmware is bad, but no idea with the pm3 would not show up in Walrus. It does work with the RRG RFID Tools app.
Offline
#10 2021-12-24 14:26:31
- kosgguy
- Contributor
- Registered: 2021-12-18
- Posts: 56
Re: fw mismatch
You have to read the advanced compilation steps (https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Use_of_Proxmark/4_Advanced-compilation-parameters.md) and select pm3 generic firmware.
Also, why don't you have discord?
Thanks
Offline
Pages: 1