Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
- Index
- » Introductions
- » Hi
Pages: 1
Topic closed
#1 2022-11-21 16:22:21
- clayray
- Contributor
- Registered: 2022-11-21
- Posts: 1
Hi
Hey I'm Clay.
I bricked my Proxmark3 easy and had a hard time getting my jlink to work until I found https://wiki.segger.com/AT91SAM7. Setting the adapter speed to 30khz solved the problem and I was able to recovery my Proxmark3
Offline
#2 2022-11-21 21:39:08
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed
- Index
- » Introductions
- » Hi