Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2022-11-28 01:07:01
- mbzadegan
- Contributor
- Registered: 2022-08-15
- Posts: 20
Set UID failed
Hi there,
How can I set UID for this card?
Should I use cwipe command or another command?
Thank you
[usb] pm3 --> hf search
[\] Searching for ISO14443-A tag...
[+] UID: 90 99 5A 1B
[+] ATQA: 00 04
[+] SAK: 08 [2]
[+] Possible types:
[+] MIFARE Classic 1K
[=] proprietary non iso14443-4 card found, RATS not supported
[+] Prng detection: weak
[#] Auth error
[?] Hint: try `hf mf` commands
[+] Valid ISO 14443-A tag found
[usb] pm3 --> hf mf cwipe --uid 9B2D574C --atqa 0004 --sak 08
[/]wipe block 0[#] wupC1 error
[!] retry block 0 ...
[-]wipe block 0[#] wupC1 error
[!] retry block 0 ...
[\]wipe block 0[#] wupC1 error
[!] retry block 0 ...
[!!] error setting block 0 (-1)
[!!] Can't wipe card. error -1
[usb] pm3 --> Last edited by mbzadegan (2022-11-28 01:10:34)
Offline
#2 2022-11-28 18:49:53
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Set UID failed
Are you sure its a magic uid changeable card?
Offline
Pages: 1
Topic closed