Proxmark3 community

ivan_bass

Contributor

Registered: 2023-04-20

Posts: 2

Issues Simulating ntag 213

Hi, Hi, I'm new in this community.

I couldn't simulate a 213 tag correctly. I dumped ( hf mfu dump) and the .bin looks good. I run the simulation, and trying to read it with a second proxmark I get some errors. with the command "hf mfu info" I get this error:

[=] --- Tag Counter
[=]        [02]: 00 00 00
[+]             - 00 tearing ( fail )
[!!] ? Error: tag didn't answer to READ SIGNATURE

And when doing a dump I could see that the MFU dump file information is zero:

[=] MFU dump file information
[=] -------------------------------------------------------------
[=] Version..... 00 04 04 02 01 00 0F 03
[=] TBD 0....... 00 00
[=] TBD 1....... 00
[=] Signature... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[=]              00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[=] Counter 0... 00 00 00
[=] Tearing 0... 00
[=] Counter 1... 00 00 00
[=] Tearing 1... 00
[=] Counter 2... 00 00 00
[=] Tearing 2... 00
[=] Max data page... 43 ( 176 bytes )
[=] Header size..... 56 bytes

I try with proxmark3 rev1 and proxmark easy, and in both cases I get the same issues.

Has anyone had similar complications?

Thanks!!

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Issues Simulating ntag 213

Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.

Your access rights has been updated.

And this is the presentation.... 
you should post in the correct channel