Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I decided to flash the fpga with fpgaimage.s19 now my prox keeps rebooting itself.
Can anyone share a default fpga image so I can get this thing working again.
Thanks.
Offline
Since you only flashed the fpgaimage, you must have used the newer version software. As such you must flash all three sections bootrom, fpgaimage and osimage at least once as their location in the memory has changed. After that you can only flash one section at a time.
What you've done now, assuming you were using the original ebuller firmware, is to overwrite part of osimage with fpgaimage thus corrupting the firmware. Reflash all three parts and you'll be OK or go back to the ebuller firmware.
Offline
Thanks finally got it to work via jtag only.
You were right ebuller was the problem.
Last edited by n0t (2008-12-20 17:58:59)
Offline
fpgaimage should be fashed? as i understanding ,we should only load osimage.s19. then it should go as you like.
FPGA images is loaded by os progrm in osimage?
Is it right?
Offline
There is a version of code that lets you flash either as you please. The FPGA image is still loaded by the main OS code, this has nothing to do with flashing the ARM.
Offline