Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi there,
How can I set a different UID for the following MIFARE card?
What command should I use?
Thank you
[usb] pm3 --> hf search
[\] Searching for ISO14443-A tag...
[+] UID: 90 99 5A 1B
[+] ATQA: 00 04
[+] SAK: 08 [2]
[+] Possible types:
[+] MIFARE Classic 1K
[=] proprietary non iso14443-4 card found, RATS not supported
[+] Prng detection: weak
[#] Auth error
[?] Hint: try `hf mf` commands
[+] Valid ISO 14443-A tag found
[usb] pm3 -->Offline
Waiting for any hints...
How can I set a different UID on this MiFare card?
Thank you.
Last edited by mbzadegan (2022-12-02 01:31:04)
Offline
If this is a MiFare card, you will NOT be able to set the UID. If it is a magic card, you can.
To set the UID on the magic card, use the command "hf mf csetuid". See below.
[usb] pm3 --> hf mf csetuid --help
Set UID, ATQA, and SAK for magic gen1a card
usage:
hf mf csetuid [-hw] [-u <hex>] [-a <hex>] [-s <hex>]
options:
-h, --help This help
-w, --wipe wipes card with backdoor cmd`
-u, --uid <hex> UID, 4/7 hex bytes
-a, --atqa <hex> ATQA, 2 hex bytes
-s, --sak <hex> SAK, 1 hex byte
examples/notes:
hf mf csetuid -u 01020304
hf mf csetuid -w -u 01020304 --atqa 0004 --sak 08
[usb] pm3 -->Offline
Thank you for your response.
How can I find if this is a magic card or not magic card?
Offline
Pages: 1