Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi all,
I'm a newbie, pls help me!
I use "20081121_prox.zip" workspace for my PrxoMark III, after run "1makearm.bat" and "2makeboot.bat" successfully, I try to run "3makewin.bat" but after show any compile and link info. such as "copy obj\prox.exe" then meet trouble "no device connected, polling for it now".
as I understood, I use a 20-pins "J-Link-ARM" usb-interface JTAG adaptor (http://microcontrollershop.com/product_ … cts_id=850) to connect the ProxMark with the USB port of PC, and I can find the J-Link adaptor in my hardware-configuration, so I think the driver for the adaptor is OK, but why show "no device connected..."? anyone help me?
thx a ton for ur help!
Best regards.
Ryan
Offline