Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hai,
I have a problem.. Please help me out. Nobody is replying for my questions.
As i read about proxmark3. when it is connect to PC, it should show "Proxmark3 RFID Instrument" and it has to be seen in "Human Interface Devices".
Then we have to manually install the driver as mentioned in Wiki's.
But for me it is not happening. I tried proxmark3 in different PC's and OSes also.
Please anybody can tell me "What may be the problem?" and if possible any solution for it.
Thanks in advance for help.
keshav
Offline
I am assuming you're using Windows 7.
Have you read the getting started guide?
Step 6: Expand out HID's
Step 7: Open each "USB Input Device" until you find the device that has the bus reported description of PM3 RFID instrument.
Offline
Hi, if you're using win7 and followed the install instructions, the short one which begins with install 7zip etc. Then a file is created proxmark3.inf or .inv Well this file needs to be added to your config man. It then creates a "libusb-win32devices" in the same row where HID stays. if you installed it you will see the name in this map. The His map just 'lost' an availeble usb-port and has less. In the new "libusb..." when you click it you see the desired proxmark3. Hope this is some help.
Offline