Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
When cloning 3c4aa2db8745bba7388ab25d73243d45f0eba2039b37413b7 what gets written on card is instead 3c4aa2cba8ba4427311564bae6487a8be1d74407366e8276f
I'm using lf indalademod 224 and lf indalaclone l. The thing is Im writing on an already written tag could that be the problem. If I get a new tag would it still be an issue?
Offline
Ok is this encrypted?
When writing to tag output will be:
a = 15
b = 17
c = 19
d = 1b
e = 1d
f = 1f
0 = 1
1 = 3
2 = 5
3 = 7
4 = 9
5 = b
6 = d
7 = f
8 = 11
9 = 13
eg.
proxmark3> lf indalaclone 01234567890abcdef l
Cloning 224bit tag with UID 0000000000000000000000000000000001234567890abcdef
proxmark3> lf indalademod 224
Expecting a bit less than 500 raw bits
Recovered 500 raw bits
worst metric (0=best..7=worst): 4 at pos 88
UID=00000000000000000000000000000011110001001010101000101100101110101000101110100100010000100111001000000000000000000000000000000000000000000000000000000000000000000010010001101000101011001111000100100001010101111001101111011111 (3c4aa2cba8ba4427200000000000000002468acf121579bdf)
3c4aa2cba8ba44272 never changes.
Offline
Nevermind, got it working writing it to a t5777 keyfob, moderator feel free to delete this post
Offline
If you have solved the problem, post the answer (then I'll close it).
Explain things so those who find themselves in a similar situation can use your advice.
Offline
Hey, sorry for late reply but been away. So the problem was quite ridiculous, I was trying to rewrite a nomal indala keyfob, of course these fobs does not allow rewriting of UID so all I did was to invalidate the keyfob. Problem was solved by using a new T5557 keyfob, and voila everything works!
Offline