Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2015-05-10 08:53:42
- joe
- Contributor
- Registered: 2013-08-15
- Posts: 126
iclass-mifare card
This is an iclass mifare card, very interesting, but too bad, none of iclass cmd here can access this card.
Offline
#2 2015-05-10 09:12:12
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: iclass-mifare card
Can you publish some what the tracelog and output from some commands looks like?
hf 14a reader / hf iclass reader etc
Offline
#3 2015-05-10 09:32:03
- joe
- Contributor
- Registered: 2013-08-15
- Posts: 126
Re: iclass-mifare card
mifare can read correctly, but, iclass can't .
Offline
#4 2015-05-10 09:39:13
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: iclass-mifare card
and the output
Offline
#5 2015-05-10 15:20:51
- joe
- Contributor
- Registered: 2013-08-15
- Posts: 126
Re: iclass-mifare card
Hi iceman,
it is an iclass elite, you mean it can be read ?? which cmd pls ?
Offline
#6 2015-06-01 15:15:18
- joe
- Contributor
- Registered: 2013-08-15
- Posts: 126
Re: iclass-mifare card
Im not sure this tag is iclass standard or elite ? please advise.
proxmark3> hf iclass reader 0
Waiting for a response from the proxmark...
Don't forget to cancel its operation first by pressing on the button
Command execute timeout
Readstatus:1e
CSN: c9 74 45 01 f9 ff 12 e0
CC: 8c 87 ff ff ff ff ff ff
Mode: Application [Locked]
Coding: ISO 14443-2 B/ISO 15693
Crypt: Secured page, keys not locked
RA: Read access not enabled
Mem: 2 KBits ( 32 * 8 bytes)
AA1: blocks 6-18
AA2: blocks 19-
Waiting for a response from the proxmark...
Don't forget to cancel its operation first by pressing on the button
#db# Failed to dump config block
Readstatus:00
Quitting...
proxmark3>
Offline
#7 2016-11-07 04:55:01
- phiber
- Contributor
- Registered: 2016-10-11
- Posts: 37
Re: iclass-mifare card
i have been told by a HID reseller that there is such a card which is interesting..
so you have 2 x 13.5mhz chips in one card?
apparently, i was told the iclass/mf reader will attempt to read iclass data first, before trying to read mf data..
Offline
Pages: 1