Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi all,
I have recently updated my proxmark3 to 2.3.0 version. I connect it to an external battery and keep the proxmark button during a couple of seconds to enter in standalone mode. When both RED lights are on (proxmark is in read mode) I tap the card to the antenna and then the RED, GREEN and ORANGE lights are on so it means (as I understand) it is emulating the card.
When I approach an NFC reader the behavior is not correct. I see that the emulated card is continously sending SELECT commands and the read of the card is incorrect. Otherwise, when I am not operating in standalone mode and I load the dumped card from the terminal it works quite fine. I guess something I am not doing right to get it work in standalone mode or it thas a bug or something.
Can anyone help me on this?
Thanks in advance!
Offline
Pages: 1