Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-08-08 22:31:34
- theguy
- Contributor
- Registered: 2017-08-08
- Posts: 52
[solved] How to clone Facility Code in an HID card?
So I cloned with
#lf hid read
and then
#lf hid clone ID
Format Lengths are different between the cards, and Facility Codes are also different. Card Number and Tag ID both cloned successfully.
Please help me make a complete clone.
Last edited by theguy (2017-08-08 23:23:40)
Offline
#2 2017-08-08 23:22:36
- theguy
- Contributor
- Registered: 2017-08-08
- Posts: 52
Re: [solved] How to clone Facility Code in an HID card?
Updating the firmware made this work. Very strange, because I didn't re-clone the card after updating firmware. Just that post-firmware update, it reads both cards' Number, ID, FC, and Format Length as being the same as each other, whereas before, it read my clone as having 37 bit Format Len and a different FC.
Offline
#3 2017-08-09 06:49:34
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: [solved] How to clone Facility Code in an HID card?
The LF signal demodulation/decoding part has changed a lot with the release v3.0.1
If you think there is a bug somewhere, do feel free to open an issue on GitHub with details information on how to replicate the bad behavior.
Offline