Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2018-02-24 05:51:12
- kiloohms
- Contributor
- Registered: 2018-02-23
- Posts: 4
[SOLVED] Loading a Trace and Plotting Waveform
Been trying to understand PM3 RF wave forms by loading traces from https://github.com/Proxmark/proxmark3/tree/master/traces.
Don't get why they look nothing like ASK/FSK OR PSK.
For instance I loaded
#db# Buffer cleared (40000 bytes)
proxmark3> data load hid-proxCardII-05512-11432784-1.pm3
loaded 93739 samples
proxmark3>Then the plot looks like:
Waveforms associated with my card scans looks alright, and my saved traces load fine too.
Is this something related to my environment (precompiled windows). Any help appreciated.
Last edited by kiloohms (2018-02-25 06:01:54)
Offline
#2 2018-02-24 08:29:21
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: [SOLVED] Loading a Trace and Plotting Waveform
yes, you seem to have a problem. When I load that trace I get a nice plot and it loads 16000 samples.
Offline
#3 2018-02-25 05:37:56
- kiloohms
- Contributor
- Registered: 2018-02-23
- Posts: 4
Re: [SOLVED] Loading a Trace and Plotting Waveform
Traces are all good with proxmark3.exe when run within MINGW32.
Offline