Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I was curious that just by using send command., can we perform below communication?
R: 26 => Welcome (REQA) (or use WUPA = 0x52)
T: 44 03 => Respond (ATQA)
R: 93 20 => Select cascade 1 (SEL)
T: 88 04 34 74 cc => CT, UID(byte 1,2,3), BCC
R: 93 70 88 04 34 74 cc 0e 05 => Select available tag (SEL)
T: 24 d8 36 => Select Acknowledge (SAK)
R: 95 20 => Select cascade 2 (SEL)
T: e1 e3 1c 80 9e => UID(byte 4,5,6,7), BCC
R: 95 70 e1 e3 1c 80 9e b9 e1 => Finish select (SEL)
T: 20 fc 70 => SAK without cascade bit set
R: e0 50 bc a5 => Request Answer to Select (RATS)
T: 06 75 77 81 02 80 => ATS (DESFire EV1)
R: 50 00 57 cd => Disable (HALT)
Regards,
Jk123
Offline