Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hello all. Proxmark3 easy. There is the following problem - when you run the script mifare_autopwn at its completion an error occurs reading .bin file or HTML and recorded files .eml differ. Firmware and trying different from the old 2.0.0 to the latest. Any help would be appreciated.
=======
uC: AT91SAM7S256 Rev C
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 199648 bytes (76%). Free: 62496 bytes (24%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3> hw version
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument
bootrom: master/v3.0.1-368-g03cdcca-suspect 2018-05-05 10:56:44
os: master/v3.0.1-368-g03cdcca-suspect 2018-05-05 10:56:48
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59
=======
|-----------------------------------------|
|----- Dumping all blocks to file... -----|
|-----------------------------------------|
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 2.
#db# Authentication failed. Error card response.
#db# Auth error
#db# READ BLOCK FINISHED
#db# Authentication failed. Error card response.
#db# Auth error
#db# READ BLOCK FINISHED
#db# Authentication failed. Error card response.
#db# Auth error
#db# READ BLOCK FINISHED
Could not read block 0 of sector 3
Wrote a HTML dump to the file 52732F13.html
Wrote an emulator-dump to the file 738258BE.eml
======
|-----------------------------------------|
|----- Dumping all blocks to file... -----|
|-----------------------------------------|
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 1.
#db# Authentication failed. Error card response.
#db# Auth error
#db# READ BLOCK FINISHED
#db# Authentication failed. Error card response.
#db# Auth error
#db# READ BLOCK FINISHED
#db# Authentication failed. Error card response.
#db# Auth error
#db# READ BLOCK FINISHED
Could not read block 0 of sector 2
ERROR: Could not read file dumpdata.bin
ERROR: Could not read file dumpdata.bin
ERROR: Could not read file
Last edited by Oleg (2018-05-08 16:52:09)
Offline