Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Well I had a problem with my Proxmark3 I was doing the installation of the drivers all success then on the subject of flashing apparently made an error and the proxmark3 started emitting a noise parapends CHR and fixed STD as well as C and A. And it does not let me do nothing, please I need your technical help.
he is attacked
Atte
thank you
Excuse my English is for translator
Offline
Try connect it to your computer while holding the button (do not loose) and flash the bootrom and the full-image. If not able, then you might need a JTAG to flash it. ¡Vamos!
Offline
Pages: 1