Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
hi
I bought a proxmark3 easy yesterday. (clone model)
model pic
https://drive.google.com/file/d/1yAKYG9daL3NE2Dr9tJTrbnqI0JP2Dwj1/view
However, there was a problem during the driver install process(prox-space master)
after driver installation, Not recognized even when proxmark 3 is plugged into usb
oddly....It is recognized by pressing and holding the button on the proxmark3 and plugging it into usb.
Release the button to disconnect again.I think I need to remove the driver.
But if I release the button disconnect again I'd like to know if anyone has experienced the same problem as me.
So I join the forum to find a solution.I'd like to get a lot of help
Offline