Proxmark3 community

tall_costello

Contributor

Registered: 2018-08-12

Posts: 1

Noob's here

Hi, everyone! This is tall_costello.
Try to make those password-protected T5577 glass tag writable again.

My hardware is Proxmark3 Easy and is installed the latest iceman x64 windows client.

The following is my 'hw version' result,

 pm3 --> hw version          

Proxmark3 RFID instrument
      

 [ CLIENT ]          
 client: iceman build for RDV40 with flashmem; smartcard;  
          
 [ ARM ]
 bootrom: iceman/master/ice_v3.1.0-1012-g905df58c 2018-08-12 14:35:58
      os: iceman/master/ice_v3.1.0-1012-g905df58c 2018-08-12 14:36:02

 [ FPGA ]
 LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
 HF image built for 2s30vq100 on 2018/ 8/10 at 11:48:34          

 [ Hardware ]           
  --= uC: AT91SAM7S256 Rev D          
  --= Embedded Processor: ARM7TDMI          
  --= Nonvolatile Program Memory Size: 256K bytes, Used: 236178 bytes (90%) Free: 25966 bytes (10%)          
  --= Second Nonvolatile Program Memory Size: None          
  --= Internal SRAM Size: 64K bytes          
  --= Architecture Identifier: AT91SAM7Sxx Series          
  --= Nonvolatile Program Memory Type: Embedded Flash Memory          

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Noob's here

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.