Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I would like to buy a lock that will open and close with an HID RFID key. Can anyone recommend something that can do this? I want to demonstrate the Proxmark in a real world situation without actually breaking into someones door.
There are a ton of reasonably priced models at: https://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=rfid+lock
Problem is I don't know if they are HID!
Last edited by streetwitch (2018-09-04 21:16:10)
Offline
The locks you linked to are not HID 125khz. It's very unlikely that you'll find a complete unit that supports 125k HID format out of the box due to licensing issues from HID global. You can also buy a small HID reader and interface it with an Arduino or ESP board for IOT control at home - this what I have done myself.
Not complete but the code is there and there should be enough for you to go off:
https://github.com/TomHarkness/homeID
Offline
Pages: 1