Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2019-01-17 20:24:54
- asmwildcat
- Contributor
- Registered: 2019-01-17
- Posts: 3
Jakcom R3 Ring Programming to HID Proximity Card
I bought a Jakcom R3 Ring online recently for my new office
I also bought a ACS NFC Reader from what I got from Jakcom site I would need to program ring.
I am trying to figure out how to program the information from my HID Proximity Card to my Jakcom R3 Ring so I don't have to use the card to open HID controlled doors.
Any help would be greatly appreciated.
Adam
Offline
#2 2019-01-17 20:43:33
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Jakcom R3 Ring Programming to HID Proximity Card
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Your access rights has been updated.
Offline
Pages: 1
Topic closed