Proxmark3 community

tristanik

Contributor

Registered: 2014-11-25

Posts: 96

Problem with Driver

Hello friends
When I try to make a sniffin, when I connect the proxmark3 here, the computer tells me an unknown device. Only by pressing the button does it see it again, but at that point the memory content is lost.
Do you have something to suggest?

C:\Users\Ugl cure\Downloads\official-64-20190312-1523527f94c4c294d0c04d0fd3396ce7eda095e4\win64>proxmark3 COM5
Prox/RFID mark3 RFID instrument
bootrom: master/v3.1.0-72-g1523527-suspect 2019-03-12 11:02:14
os: master/v3.1.0-72-g1523527-suspect 2019-03-12 11:02:17
fpga_lf.bit built for 2s30vq100 on 2015/03/06 at 07:38:04
fpga_hf.bit built for 2s30vq100 on 2019/02/15 at 20:40:32
SmartCard Slot: not available

uC: AT91SAM7S256 Rev C
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 205305 bytes (78%). Free: 56839 bytes (22%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3>

Last edited by tristanik (2019-03-12 15:59:03)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Problem with Driver

Do respect the forum language rule,  or get perma banned.     We use english here.

tristanik

Contributor

Registered: 2014-11-25

Posts: 96

Re: Problem with Driver

sorry, I messed up with the translator

Last edited by tristanik (2019-03-12 16:00:07)

piwi

Contributor

Registered: 2013-06-04

Posts: 704

Re: Problem with Driver

I don't understand your question. I can see your proxmark responding on COM5, so the correct driver is there.

Maybe it helps, if you show us the commands you are typing, the responses you get, and what you expect.

tristanik

Contributor

Registered: 2014-11-25

Posts: 96

Re: Problem with Driver

I tried both with iceman and official precompiled. The proxmark is perfectly recognized, I run the command: proxmark3> hf 14a snoop
The red light of memory  A turns on, I detach the proxmark with the battery connected, I put it between the reader and the card, then I hang up the proxmark and the computer tells me "unknown device on usb"

piwi

Contributor

Registered: 2013-06-04

Posts: 704

Re: Problem with Driver

USB reconnect is not implemented in official repository.

tristanik

Contributor

Registered: 2014-11-25

Posts: 96

Re: Problem with Driver

But even precompiled Iceman tells me unknown usb after sniffing