Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-05-14 07:21:49
- raveedc
- Contributor
- Registered: 2019-01-23
- Posts: 6
pixel 3xl walrus, rdv4 iceman flash compatibility & Stand Alone Mode
Is there a way to get the PROXMARK 3 RDV4 with Iceman fork to work in standalone mode with a pixel 3xl?
The plan is to go to a festival and read people's bracelets and out their read credentials onto our bracelets which have mifare rfid in them.
I am able to write someone else's credentials onto a mifare rfid correct?
Please help to answer both questions above.
Also will I have to downgrade to a different fork to have my rdv4 work in standalone mode with walrus running on my pixel3XL?
Offline
#2 2019-06-17 15:08:01
- Mackwa
- Contributor
- Registered: 2016-06-10
- Posts: 51
Re: pixel 3xl walrus, rdv4 iceman flash compatibility & Stand Alone Mode
proxmark3 standalone mode works with any usb power supply, so it should also work with a pixel 3xl 
Offline