Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-06-21 21:41:38
- Charlie
- Contributor
- Registered: 2017-01-27
- Posts: 129
Changing UID ATQA and SAK
Hi,
Im trying to change the SAK AND ATQA value on a 1K card to pretend to be a 4k Card. When I try it change the UID it doesnt seem to work.
pm3 --> hf sea u
UID : 9D 21 95 A9
ATQA : 00 02
SAK : 88 [2]
TYPE : Infineon MIFARE CLASSIC 1K
proprietary non iso14443-4 card found, RATS not supported
Answers to magic commands (GEN 1a): YES
Prng detection: WEAK
Valid ISO14443-A Tag Foundpm3 --> hf mf csetuid 9D2195A9 0002 18
--wipe card:NO uid:9D 21 95 A9
old block 0: 9D 21 95 A9 80 98 02 00 E3 32 00 20 00 00 00 17
new block 0: 9D 21 95 A9 80 18 02 00 E3 32 00 20 00 00 00 17
old UID:00 00 00 00
new UID:9D 21 95 A9
pm3 --> hf sea u
UID : 9D 21 95 A9
ATQA : 00 02
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1 | 1k Ev1
proprietary non iso14443-4 card found, RATS not supported
Answers to magic commands (GEN 1a): YES
Prng detection: WEAK
Valid ISO14443-A Tag FoundAny help or a point in the right direction would be great.
Thanks
Offline
#2 2019-06-21 21:55:01
- 3dmann
- Contributor
- From: BRD- Deutschland
- Registered: 2019-05-18
- Posts: 43
Re: Changing UID ATQA and SAK
that's the mistake so it was at least with me
SAK : 88 [2]
SAK : 08 [2]
Offline
#3 2019-06-26 17:41:53
- Charlie
- Contributor
- Registered: 2017-01-27
- Posts: 129
Re: Changing UID ATQA and SAK
Hi,
thanks for your reply, were you able to change the SAK value?
I was trying to set the SAK value as "18"and it wont allow me
pm3 --> hf mf csetuid 9D2195A9 0002 18Offline
#4 2019-06-26 18:46:39
- 3dmann
- Contributor
- From: BRD- Deutschland
- Registered: 2019-05-18
- Posts: 43
Re: Changing UID ATQA and SAK
SAK worth 18 ??? is there any value? 18
I only have sak 08 so far
example hf mf csetuid 39BFDA7B 0004 08
Last edited by 3dmann (2019-06-26 18:47:16)
Offline
#5 2019-06-26 22:16:49
- Charlie
- Contributor
- Registered: 2017-01-27
- Posts: 129
Re: Changing UID ATQA and SAK
Watch Icemans Video: https://youtu.be/idtBV9wr0Eo?t=331
Last edited by Charlie (2019-06-26 22:17:31)
Offline
#6 2019-06-26 22:44:01
- 3dmann
- Contributor
- From: BRD- Deutschland
- Registered: 2019-05-18
- Posts: 43
Re: Changing UID ATQA and SAK
NXP MIFARE CLASSIC 1k
not
NXP MIFARE CLASSIC 4k SAK 18 i video clip
Offline
#7 2019-06-27 05:08:22
- Charlie
- Contributor
- Registered: 2017-01-27
- Posts: 129
Re: Changing UID ATQA and SAK
NXP MIFARE CLASSIC 1k
not
NXP MIFARE CLASSIC 4k SAK 18 i video clip
The idea is that you can get a 1k card to appear to be a 4k card by changing the SAK
Offline
#8 2019-06-27 05:09:59
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Changing UID ATQA and SAK
it could be the uid card you are using, the gen1a ones has many different ones, not all allow for setting of SAK, and some even limits what you can write and some allow full change.
Offline
#9 2019-07-16 20:28:58
- hfmfsniff
- Contributor
- Registered: 2019-07-07
- Posts: 19
Re: Changing UID ATQA and SAK
I bought 33 tags/cards from multiple vendors on Taobao/AliExpress and tested them one by one.
Most of them simply reply SAK=08 even if you changed SAK bytes.
Only 4 exceptions (2CUIDs, 2UIDs) implement real SAK change. Therefore, I immediately placed a larger order to build a reserve of this type of "precious" fully changeable tags.
They are on the way, I haven't tested them and remain pessimistically optimistic, since sources of these chips are mixed and unstable.
Willing to trade with anyone who need UID or CUID with such changeable SAK.
I am also willing to exchange these tags for any versions of secondhand Chameleon.
Last edited by hfmfsniff (2019-07-17 19:00:29)
Offline
#10 2019-07-17 06:06:50
- Charlie
- Contributor
- Registered: 2017-01-27
- Posts: 129
Re: Changing UID ATQA and SAK
I bought 33 tags/cards from multiple vendors on Taobao/AliExpress and test them one by one.
Most of them simple reply SAK=08 change even if you set SAK bytes.Only 4 exceptions (2CUIDs, 2UIDs) allow this. I immediately placed a larger order to build a reserve of this type of "precious" tags. They are on the way, but I am not sure they will allow SAK change since sources of these chips are mixed and unstable.
Willing to trade with anyone who need UID or CUID with such changeable SAK.
How do i contact you?
Offline
#11 2019-07-17 09:52:08
- hfmfsniff
- Contributor
- Registered: 2019-07-07
- Posts: 19
Re: Changing UID ATQA and SAK
hfmfsniff wrote:I bought 33 tags/cards from multiple vendors on Taobao/AliExpress and test them one by one.
Most of them simple reply SAK=08 change even if you set SAK bytes.Only 4 exceptions (2CUIDs, 2UIDs) allow this. I immediately placed a larger order to build a reserve of this type of "precious" tags. They are on the way, but I am not sure they will allow SAK change since sources of these chips are mixed and unstable.
Willing to trade with anyone who need UID or CUID with such changeable SAK.
How do i contact you?
hugearc at gmail
Offline
Pages: 1