Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2010-11-16 15:17:03
- Centurio
- Member
- Registered: 2010-10-07
- Posts: 3
Unknown LF Card
I just started out working with the Proxmark and managed to communicate with some Mifare cards, so I am only a beginner. The problem I am interested in is this LF card I have, so I used the lf read and plotted the samples.
Can anyone guide me in the right direction?
Last edited by Centurio (2010-11-26 16:05:13)
Offline
#2 2010-11-26 16:04:49
- Centurio
- Member
- Registered: 2010-10-07
- Posts: 3
Re: Unknown LF Card
Ok, that was stupid. If there is no card near I get the same signal so it's just noise I guess. I guess the card has to receive a command before it answers.
Any progress on the LF sniffing? That would help a lot.
Offline
Pages: 1