Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-09-29 08:14:31
- CFusion
- Contributor
- Registered: 2019-08-31
- Posts: 13
Flashing with Xilinx Platform cable [SOLVED]
Does anyone have any experience using Xilinx devices?
I am attempting to flash a proxmark3 easy that is bricked and this was the only JTAG interface I can get my hands on.
I'm searching around but I am having some trouble getting information for just simply flashing over JTAG.
******Edit********
Just talking to myself here. For anyone else who may have a similiar question ;-) the guys over Xilinx community told me it wouldn't work since I need to flash the AT controller not the Spartan. Thankfully I have a Raspberry Pi and a shitload of time to figure out the tutorial on these forums: http://www.lucasoldi.com/2017/01/17/unbrick-proxmark3-with-a-raspberry-pi-and-openocd/
Made my day powering up the pm3 easy again. I thought it was done for.
Last edited by CFusion (2019-10-02 16:31:48)
Offline