Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2019-10-09 02:33:41
- saizad
- Contributor
- Registered: 2019-10-09
- Posts: 2
Cloning Indala to em410x
Hi, I am trying to clone my apartment fob that is Indala to em410x (Ceramic Ring 125Khz or 13.56 MHZ). I ran lf indala clone a000000091f882f1 em410x but when I tried it didn't work. Just want to know whether can I clone Indala fob to this ring? When I run lf search for em410x i get this output:
proxmark3> lf search
NOTE: some demods output possible binary
if it finds something that looks like a tag
False Positives ARE possible
Checking for known tags:
EM410x pattern found:
EM TAG ID : 2800E9D96C
Possible de-scramble patterns
Unique TAG ID : 1400979B36
HoneyWell IdentKey {
DEZ 8 : 15325548
DEZ 10 : 0015325548
DEZ 5.5 : 00233.55660
DEZ 3.5A : 040.55660
DEZ 3.5B : 000.55660
DEZ 3.5C : 233.55660
DEZ 14/IK2 : 00171814017388
DEZ 15/IK3 : 000085909281590
DEZ 20/ZK : 01040000090709110306
}
Other : 55660_233_15325548
Pattern Paxton : 687740780 [0x28FE176C]
Pattern 1 : 11988306 [0xB6ED52]
Pattern Sebury : 55660 105 6936940 [0xD96C 0x69 0x69D96C]
Valid EM410x ID Found!
Valid EM4x05/EM4x69 Chip Found
Try lf em 4x05... commands
Offline
#2 2019-10-09 07:14:45
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Cloning Indala to em410x
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed