Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hello,
I have several Hid R40 se multiclass readers(high compatibility) with standard keyset. Running a Wiegand interception tool to gather access control data from the readers when cards are swiped.
Iclass legacy cards output in 26 bit H10301 format.
Mifare Classic cards with 4 byte UID output the 32 bit UID value.
I found a reference in HID documentation which I found interesting. https://www.hidglobal.com/sites/default/files/iclass-r-series-c-readers-ds-en.pdf
When reading ISO 14443A cards
(MIFARE®/ DESFire®), the reader can
be configured to output 26-bit, 32-bit
(MSB), 32-bit (LSB), 34-bit, 40-bit or
56-bit Wiegand formats based on the
CSN (card serial number).
Anyone know what the serial number range needs to in to output in 26 bit format or is this specific to a custom reader configuration? Any default ranges?
Another interesting bit of info is that it appears the hid application data can be encoded on Sector 1 of Mifare cards. https://www.hidglobal.com/sites/default/files/0025_an_en.pdf
Does anyone know what the format or Sector 1 should look like?
Thank you
Offline
I see HID sells HID MIFARE Classic/HID Prox 1431 Combo Card
https://www.hidglobal.com/products/cards-and-credentials/flexsmart-mifare-desfire/1431
Anyone ever come across one or able to provide what the block layout looks like? From my reading it appears the Mifare data is written to output 26 bit H10301 format on a HID iclass reader.
Thank You
Offline