Proxmark3 community

Auden69

Contributor

Registered: 2020-06-23

Posts: 3

Website

French unkwon tag...

Hello,

It’s a french tag used at my work and i don’t knwo how to deal with…

nfc-list -v
nfc-list uses libnfc 1.7.1
NFC device: ACS / ACR122U PICC Interface opened
1 ISO14443A passive target(s) found:
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04  
* UID size: single
* bit frame anticollision supported
       UID (NFCID1): 45  0a  da  d0  
      SAK (SEL_RES): 00  
* Not compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092

Fingerprinting based on MIFARE type Identification Procedure:
* SmartMX with MIFARE 1K emulation
Other possible matches based on ATQA & SAK values:
0 Felica (212 kbps) passive target(s) found.
0 Felica (424 kbps) passive target(s) found.
0 ISO14443B passive target(s) found.
0 ISO14443B' passive target(s) found.
0 ISO14443B-2 ST SRx passive target(s) found.
0 ISO14443B-2 ASK CTx passive target(s) found.
0 Jewel passive target(s) found.

nfc-mfclassic r a test.mfd
NFC reader: ACS / ACR122U PICC Interface opened
Warning: tag is probably not a MFC!
Found MIFARE Classic card:
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04  
       UID (NFCID1): 45  0a  da  d0  
      SAK (SEL_RES): 00  

mfoc -O test.dmp
mfoc: ERROR: only Mifare Classic is supported

Any idea ??

Thanks ...

fazer

Contributor

Registered: 2019-03-02

Posts: 156

Re: French unkwon tag...

Hello, you are working with an acr122U, here Proxmark3 commands are not the same, there are forums for your hardware.
Good evening.