Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I've spent a lot of time familiarizing myself with some basics and have been able to clone cards for my apartment complex easily, so I thought I'd take up a larger challenge.
Here's some info on the card, I'll call it #1
[-] Searching for ISO14443-A tag...
[+] UID: 6F B9 8C B9
[+] ATQA: 00 02
[+] SAK: 38 [1]
[+] Possible types:
[+] MIFARE Classic 1K / Classic 1K CL2
[+] MIFARE Plus 2K / Plus EV1 2K
[+] MIFARE Plus CL2 2K / Plus CL2 EV1 2K
[+] MIFARE Plus 2K / Plus CL2 2K
[+] MIFARE Classic 4K / Classic 4K CL2
[+] MIFARE Plus 2K/4K / Plus EV1 2K/4K
[+] MIFARE Plus CL2 2K/4K / Plus CL2 EV1 2K/4K
[+] ATS: 0D 78 80 B1 02 4A 43 4F 50 76 32 34 31 0B 32
[+] - TL : length is 13 bytes
[+] - T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 8 (FSC = 256)
[+] - TA1 : different divisors are NOT supported, DR: [], DS: []
[+] - TB1 : SFGI = 1 (SFGT = 8192/fc), FWI = 11 (FWT = 8388608/fc)
[+] - TC1 : NAD is NOT supported, CID is supported
[+] Prng detection: hard
[+] Valid ISO14443-A tag foundI'm trying to clone it to card #2
[\] Searching for ISO14443-A tag...
[+] UID: 6F B9 8C B9
[+] ATQA: 00 02
[+] SAK: 38 [1]
[+] Possible types:
[+] MIFARE Classic 1K / Classic 1K CL2
[+] MIFARE Plus 2K / Plus EV1 2K
[+] MIFARE Plus CL2 2K / Plus CL2 EV1 2K
[+] MIFARE Plus 2K / Plus CL2 2K
[+] MIFARE Classic 4K / Classic 4K CL2
[+] MIFARE Plus 2K/4K / Plus EV1 2K/4K
[+] MIFARE Plus CL2 2K/4K / Plus CL2 EV1 2K/4K
[=] proprietary non iso14443-4 card found, RATS not supported
[+] Magic capabilities : Gen 1a
[#] 1 static nonce 01200145
[+] Static nonce: yes
[+] Valid ISO14443-A tag foundI've tried using this command
hf mf restore 4 u 6FB98CB9 k hf-mf-6FB98CB9-key.binWhich avoided an error
[#] Auth error
[+] isOk:00which I'd get whenever I don't have the extra arguments.
My best guess is that the card #2 can't have the ATS component. I don't know what this is and haven't been able to figure it out either. So here I am. Do I need a different card? or just to keep trying with it.
Thanks
Offline
Pages: 1