Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-11-29 07:25:24
- centurix
- Contributor
- Registered: 2020-11-29
- Posts: 1
Hi from Brisbane
Dialling in to learn more about low and high frequency RFID and how to use my Proxmark 3 Easy. So far so good. With the exception that I dun bricked it. 
I've been a programmer for around 35 years doing all sorts of stuff from business systems through medical imaging and lots of defence work. My electronics interest is something I do outside of my full time job and is very satisfying. I do a fair bit of reverse engineering, both for electronics and software and my latest projects include tearing apart and documenting the BMW iDrive systems, hacking old arcade machines and also restoring 70's/80's era pinball machines.
Offline
#2 2020-11-29 09:00:24
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi from Brisbane
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed