Proxmark3 Easy and RRG/Iceman Fork - Having troubles with hf search

TeamRocket · 2021-01-01 00:16:09

Hey, compiled latest iceman rrg and flashed a pm3 easy 512 everything working as expected awid em hid gprox etc lf all work fine... havent tried clone commands just search

but doing a simple hf search im having issues, on the original proxmark3 client it would just instantly show mifare type, uid, etc.. now it is sowly going through each tag type when it hits iclass it says valid iclass found, but its not iclass.. then it carries on searching and when it gets to "Searching for ISO14443-B tag" it shows "Communicating with Proxmark3 device failed" proxmark disconnects.

here is the output of an hf search:

[usb] pm3 --> hf search
[|] Searching for ThinFilm tag...[!] timeout while waiting for reply.
[|] Searching for iCLASS / PicoPass tag...
[+] Valid iCLASS tag / PicoPass tag found

[-] Searching for ISO14443-B tag...
[!] Communicating with Proxmark3 device failed

TeamRocket · 2021-01-01 00:22:23

Is there a compatibility issue here? Anyone else working w rrg/iceman on pm3easy?
When compiling, I did change the make lines in autobuild.sh in proxspace/mysys2/ps/ to:
"make PLATFORM=PM3OTHER clean" and "make PLATFORM=PM3OTHER all -j$jobs"

TeamRocket · 2021-01-01 06:37:14

Well.. turned out it was just a faulty proxmark. Ordered another. Not a very active community huh...

iceman · 2021-01-01 09:16:13

there is more activity on the discord server

Proxmark3 community

Announcement

#1 2021-01-01 00:16:09

Proxmark3 Easy and RRG/Iceman Fork - Having troubles with hf search

#2 2021-01-01 00:22:23

Re: Proxmark3 Easy and RRG/Iceman Fork - Having troubles with hf search

#3 2021-01-01 06:37:14

Re: Proxmark3 Easy and RRG/Iceman Fork - Having troubles with hf search

#4 2021-01-01 09:16:13

Re: Proxmark3 Easy and RRG/Iceman Fork - Having troubles with hf search

Board footer