Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2014-04-12 17:45:32
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
stange s50 card and keyA
If you look at the following reading of Block 0, the key is default, but can't I see the KEYA in the sector or block3 read?
proxmark3> hf mf rdsc 0 a ffffffffffff
--sector no:00 key type:00 key:ff ff ff ff ff ff
#db# READ SECTOR FINISHED
isOk:01
data:d6 55 9f e0 fc 08 04 00 23 56 23 56 22 11 ff ff
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
data:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
data:00 00 00 00 00 00 ff 07 80 69 ff ff ff ff ff ff
proxmark3> hf mf rdbl 3 a ffffffffffff
--block no:03 key type:00 key:ff ff ff ff ff ff
#db# READ BLOCK FINISHED
isOk:01 data:00 00 00 00 00 00 ff 07 80 69 ff ff ff ff ff ff
proxmark3>
Offline
#2 2014-04-13 02:57:30
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: stange s50 card and keyA
that behavior is perfectly normal. the sector trailer security prevents key A from ever being read. (except when hacked)
Offline
Pages: 1