Proxmark3 community

szymonunion

Contributor

Registered: 2009-07-05

Posts: 46

List of needed chips/parts to be assembled on PCB ???

Guys,

maybe I am blind, but I cannot find on forum nor in the files section list of needed chips/parts to be assembled on PCB.
I just sent question to local company with schema I found here http://www.proxmark.org/files/index.php … tchpcb.zip. I will check how much it is here - I asked them for quotation 1-2 PCB's and 3-5 PCB's )) I will let you know guys.

d18c7db

Contributor

Registered: 2008-08-19

Posts: 292

Re: List of needed chips/parts to be assembled on PCB ???

It's in the proxmark3-may23-2007.zip file in the files section http://www.proxmark.org/files/index.php?dir=J.Westhues

Open the zip file and look in the doc/proxmark3.xls

There was an updated xls file that theqlabs did as some of the Digikey part numbers had changed but the above is a good start.

szymonunion

Contributor

Registered: 2009-07-05

Posts: 46

Re: List of needed chips/parts to be assembled on PCB ???

d18c7db,

thx 4 info. I was looking for the last one file I mean as new as possible. I read some topic here on this forum with link to site of theqlabs, but that link (to XLS file) was not working. Fortunately I got answer from theqlabs today regarding assembled/tested device so I will ask him about new XLS file.

d18c7db

Contributor

Registered: 2008-08-19

Posts: 292

Re: List of needed chips/parts to be assembled on PCB ???

Z827-ND from Digikey

dean-brinkman

Member

Registered: 2014-04-17

Posts: 2

Re: List of needed chips/parts to be assembled on PCB ???

Z827-ND from Digikey

so where do you keep the update parts list
AND IT IS ONLY DIGIKEY PART NUMBER THAT CHANGED NOT THE ACTUEL PART ???