Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2014-08-31 20:56:26
- mocra
- Member
- Registered: 2014-08-31
- Posts: 2
could be a stupid question
hello all, newbie here. im having trouble with a few cards i figured it could be a stupid thing such as tuning or using the wrong command. the defualt t5 card that came with the unit reads fine even in stand alone. i have another card which is this (http://www.farpointedata.com/images/stories/datasheets/PSI-4/PSI-4_datasheet.pdf) which doesnt read at all and gives no data when i run lf read. any ideas?
Offline
#2 2014-08-31 21:52:54
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: could be a stupid question
Did you do all commands?
lf read
data samples 4000
data plot
Offline
#3 2014-09-01 16:27:15
- mocra
- Member
- Registered: 2014-08-31
- Posts: 2
Re: could be a stupid question
yes i did came up with nothing no reads, any ideas on this card though?
Offline
#4 2014-09-01 17:37:55
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: could be a stupid question
Are you sure it is a LF card? If you look at the hf tune output, or your card might be broken.
Offline
#5 2014-09-01 20:07:35
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: could be a stupid question
What do you mean by "nothing no reads"? Your plot is flat lined?
Offline
Pages: 1