Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi to such a greate community,
I've updated to the latest Bootrom, OS and FPGA firmwares.
Thats the log:
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: /-suspect 2014-09-19 10:31:37
#db# os: /-suspect 2014-09-13 11:21:04
#db# HF FPGA image built on 2014/ 6/19 at 21:26: 2
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
1) So the problem is that when I start the darkside attack, most of the time it just hangs and than proxmark restarts by itself
2) The second problem is that it doesnt emulate the mifare card. I load the eml file into memory, it is stored there, no problem here, but than I use command: "hf mf sim" and it just returns:
uid:N/A, numreads:0, flags:0 (0x00)
proxmark3>
proxmark3> #db# 4B UID: 5c444x7s
And no simlutation is going on.
Then I press the button on the proxmark itself and get this:
proxmark3> #db# Emulator stopped. Tracing: 1 trace length: 0
I would really appreciate any help,
Have been messing with it whole nights,
Yours sincerely,
John
Offline
Regarding 2)
How do you know it does not emulate ? What you're describing sound like it is - how do you check what is happening on the air?
Also try increasing the debuglevel 'hf mf dbg 4'. Doing so may by itself screw with the functionality, since doing USB-writes to write the debug messages disturb the sensitive timings in the reader<-> tag communication, but at least it gives you some more info.
Offline
Pages: 1