Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hey guy's,
My name is rony I've just joined this forum looks like a nice environment here .
I'm really interested in rfid and electronics itself however I got a few questions and hope you guys can help me out.
So I got this omnikey 5321 v2 a few days ago, my plan was to copy my I class key.
I've got some written iclass keys and some empty keys.
My problem is that I can't get the reader running, could someone advice me a software and a driver, doesn't mater if freeware or not.
I'm running win 7 64 bit but could get any VM if needed.
Cheers rony
Offline
HID Official Drivers and software.
Omnikey 5321v2 is an officially discontinued product.
Unfortunately I doubt you will get support for your 5321v2 device here because this forum is about proxmark3 and not Omnikey.
Last edited by asper (2014-11-02 10:40:59)
Offline
Thanks for the answer,
Could you then give me a quick introduction in usb rfid reader.
I really try to get infos myself but I struggle
Isn't there any software in which you can use the reader with the right driver ?
Or do you have to use different software for every different reader ?
However could anyone tell me where to get the right information to start up just basics etc...
Thanks
Offline
Here are some of the files you will need:
* http://www.proxmark.org/files/Various%20Hardware/OMNIKEY%205x21/
* http://www.proxmark.org/files/Various%20Software/iClass/
* ftp://ftp.amano.com/TruTime/Incoming/For%2520Dave/MATM%2520Express/MATM%2520User%2520Guide.pdf
Copy class (public version) only decodes the iClass card, best bet is playing with the iclassified framework, and writing your own program.
Offline
Pages: 1