Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2014-12-20 05:08:12
- Upgrade
- Contributor
- Registered: 2014-12-14
- Posts: 36
Decoding Verex/Guardall Fob
I'm trying to decode and clone this verex/guardall fob
Still pretty new at PM3 so bare with me!
Guardall 36bit G-ProxII Chip with wiegand output
Sticker Tag on key:
FC:
30
GX1002_4:
10832
Did following:
lf read
data samples 20000
data save c:\verex.pm3
Link to trace: http://www.filedropper.com/verex
Steps to decode and clone? Can I use the FC and GX to clone? Thank you very much in advance!
Last edited by Upgrade (2014-12-20 08:23:08)
Offline
#2 2014-12-20 05:10:12
- Upgrade
- Contributor
- Registered: 2014-12-14
- Posts: 36
Re: Decoding Verex/Guardall Fob
I should mention this is a g-prox II or III key with either WG 26/36 or 40 bit
Offline
#3 2014-12-20 06:03:14
- Upgrade
- Contributor
- Registered: 2014-12-14
- Posts: 36
Re: Decoding Verex/Guardall Fob
This is also the data plot
Offline
Pages: 1