Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hey there
I am trying to snoop an unencrypted crypto RF card and I am getting the following blown buffer message
E:\PROXMARK\pm3-bin-20150224\pm3-bin-20150224\win32>proxmark3 com5
proxmark3> hf 14b snoop
#db# Snooping buffers initialized:
#db# Trace: 39360 bytes
#db# Reader -> tag: 256 bytes
#db# tag -> Reader: 256 bytes
#db# DMA: 128 bytes
#db# blew circular buffer! behindBy=0x74
#db# Snoop statistics:
#db# Max behind by: 116
#db# Uart State: 0
#db# Uart ByteCnt: 0
#db# Uart ByteCntMax: 256
#db# Trace length: 0
proxmark3>
I am using what should be the latest out of the git hub. When I try to run a list after this I do not get anything. Can anyone help me get the snooper working?
Offline
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: master/v1.1.0-269-g0387cd3-suspect 2015-02-24 19:18:25
#db# os: master/v1.1.0-269-g0387cd3-suspect 2015-02-24 19:18:26
#db# HF FPGA image built on 2015/02/11 at 21:05:50
uC: AT91SAM7S256 Rev A
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 256K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3>
Offline
Pages: 1