Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
hello everyone. Can I use the snoop function without using a pc and save the data on proxmark3? is this possible?
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: /-suspect 2015-01-31 07:13:30
#db# os: /-suspect 2015-01-31 07:13:36
#db# HF FPGA image built on 2015/01/15 at 12:19:06
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
Offline
Yes; you need to power the pm3 with an external battery, launch the snoop command and then, after you finished snooping, reconnect and send the list command.
Offline
thanks, I'll try 'very soon
Offline
To stop snooping remember to press the button.
Offline
I tried, but without the PC connected proxmark button is misplaced and when i connect again the PC does not recognize it more "ERROR: invalid serial port". I use client windows pm3-bin0.0.7
Offline
if I press the button to end the snoop, nothing happens without pc
Offline
Data are inside the buffer, try to make pm3 available to pc again and send the list command, it should work.
Offline
Pages: 1